PENDANT STATION, UP/ENABLE/DOWN WITH STOP SWITCH SIEMENS 3SB38

PENDANT STATION, UP/ENABLE/DOWN WITH STOP SWITCH SIEMENS 3SB38 nan

ORANGE MESH SHAFTWAY BARRIER, OSHA APPROVED, 4' x 150'

Flame Retardant Orange Debris NettingOur 4'x150' Flame Retardant Orange Debris Netting satisfies OSHA regulations for debris containment, perimeter safety, overhead protection, and the all-inclusive general duty clause.Made of knitted polyethylene threeads with reinforced border Fire Retardant Lightweight, stays flexible in cold weather Economical and cost-effective IMPORTANT..MEETS NYC LOCAL LAW 61 & OSHA SPECIFICATIONSHole opening 1/4 nan

CAUTION TAPE 1.89 X 55 YD EACH YELLOW TAPE SAFETY DANGER WARNING

NEW YELLOW CAUTION TAPE1.89 INCH X 55 YD OR 48 MM X 50 M nan

CAR BUILDING BLOCK WITH PLATE FOR 8, 12. 15 AND 18.5 POUND RAILS

Car Building Rail Blocks are rated at 15,000 lbs per PAIR, and have been tested to 29,000 lbs per pair by an independent testing facility. Copies of test results are available upon request. Torque all bolts to 70 ft-lbs. Recommend replacement of bolts after each use. Bolts provided are case hardened, do not replace with bolts of lower strength. MUST BE USED IN PAIRS! PRICE...

CAR BUILDING BLOCK WITH PLATE FOR 22.5 & 30 POUND RAILS

Car Building Rail Blocks are rated at 15,000 lbs per PAIR, and have been tested to 29,000 lbs per pair by an independent testing facility. Copies of test results are available upon request. Torque all bolts to 70 ft-lbs. Recommend replacement of bolts after each use. Bolts provided are case hardened, do not replace with bolts of lower strength. MUST BE USED IN PAIRS! PRICE...

CAR BUILDING BLOCK WITH ANGLE FOR 8, 12. 15 AND 18.5 POUND RAILS

Car Building Rail Blocks are rated at 25,000 lbs per PAIR. Testing for load strength has been performed by an Independent Testing Facility. Copies of test results are available upon request. Torque all bolts to 70 ft-lbs. Recommend replacement of bolts after each use. Bolts provided are case hardened, do not replace with bolts of lower strength. MUST BE USED IN PAIRS! PRICE IS FOR...

CAR BUILDING BLOCK WITH ANGLE FOR 22.5 AND 30 POUND RAILS

Car Building Rail Blocks are rated at 25,000 lbs per PAIR. Testing for load strength has been performed by an Independent Testing Facility. Copies of test results are available upon request. Torque all bolts to 70 ft-lbs. Recommend replacement of bolts after each use. Bolts provided are case hardened, do not replace with bolts of lower strength. MUST BE USED IN PAIRS! PRICE IS FOR...

BUFFER SPRING 9 H X 5 1/2 O.D. X 3 3/8 I.D.

9 H X 5-1/2 O.D. X 3-3/8 I.D.1-1/16 wire.Maximum Solid Capacity - 10,721 lbs.Rating - 4,288 lbs. per inch with 2-1/2 stroke nan

ADJUSTABLE PIPE CUTTER, CUT UP TO 1 1'8 ALUMINUM, COPPER & STEEL

•Professionals choice for fast, clean cuts on copper, brass, mild steel and aluminum pipe & tubing •Heat-treated & tempered carbon steel cutting wheel, easy to replace •Adjustable-size clamp with dual steel rollers for smooth operation; cuts pipe from 1/8 to 1-1/8 •Heavy-duty die-cast aluminum frame, hardened steel screw; easy-store 5 x 2-1/4 size, 8.5 oz •Built in fold-out galvanized steel reamer tool for deburring pipe...