TESTER, BATTERY, STATUS MONITOR TRITEK # BT-3

TESTER, BATTERY, STATUS MONITOR TRITEK # BT-3 nan

SIX INCH NON-CONDUCTIVE VERNIER CALIPER INSIDE/OUTSIDE

Non-Rust Non-Magnetic 6 Slide Vernier Caliper with Depth Probe - Sae & MetricClassic vernier caliper for accurate measurements in non-rusting, non-magnetic plastic Scale marked in SAE and metric; resolution 1/128, 0.05mm, range 0-6, 0-150mm Performs both inside and outside measurements plus galvanized steel depth probe Length overall 8-3/4, outside-jaw capacity 1-1/2, inside 1/2; weight less than 2 oz nan

SIX INCH DIAL VERNIER CALIPER, NON RUSTING, NON MAGNETIC

Non-Rust Non-Magnetic 6 Dial Vernier CaliperClassic dial caliper for accurate measurements in non-rusting, non-magnetic plastic Gear rack needle, knurled thumb wheel, acrylic dial lens; easy-to-use & accurate 1-1/2 dial and scale marked in SAE and metric; resolution 0.001, 0.02mm, range 0-6, 0-150mm Performs both inside and outside measurements plus nickel-plated steel depth probe Length overall 8-3/4, outside-jaw capacity 1-1/2, inside 1/2; weight less than 2...

SET, JACK SCREW, WITH ALL ATTACHMENTS SEE BELOW, STARRETT S190

SET, JACK SCREW, WITH ALL ATTACHMENTS SEE BELOW, STARRETT S190Complete with All Attachments, 2-1/4-3-3/8-Inch (57-85mm) Range, 1-1/4-Inch (32mm) Base Diameter nan

PROFESSIONAL CLAMP METER

Features:1-3/4 LCD with a 4 digit reading Versatility of use with AC/DC voltage and resistance measurement Data hold for easy reading Includes 9 volt battery and vinyl carrying case Designed for use by electricians, technicians & servicemenOperating Features: AC Current: 0.1A to 1000 A Insulation Test: 100K to 2000M AC Voltage: 1 V to 750 V DC Voltage: 1 V to 1000 V Resistance: 100m...

METER, PANEL, 0-300 VOLTS DC, CONTROLLER MOUNTED, CLEAR PLASTIC COVER

METER, PANEL, 0-300 VOLTS DC, CONTROLLER MOUNTED, CLEAR PLASTIC COVER nan

METER, PANEL MOUNT, 0-50 AMPERES, 4 1/2 SIMPSON MODEL 29 # 0540

METER, PANEL MOUNT, 0-50 AMPERES, 4 1/2 SIMPSON MODEL 29 Cat # 0540 nan

METER, PANEL MOUNT, 0-50 AMPERES, 3 1/2 SIMPSON MODEL 1357 # 3210

METER, PANEL MOUNT, 0-50 AMPERES, 3 1/2 SIMPSON MODEL 1357 # 3210 nan

METER, PANEL MOUNT, 0-25 MICRO AMPERES, 4 1/2 KNIGHT # 52-7208

METER, PANEL MOUNT, 0-25 MICRO AMPERES, 4 1/2 KNIGHT # 52-7208 nan

KIT, JACK SCREW, COMPLETE AS SHOWN, STARRETT # S190

KIT, JACK SCREW, COMPLETE AS SHOWN, KIT, JACK SCREW, COMPLETE AS SHOWNSTARRETT # S190 # S190 nan

GAUGE, SHEAVE GROOVE MEASURING, 3/8 TO 3/4NON-MAGNETIC, 7 SECTION

GAUGE, SHEAVE GROOVE MEASURING, 3/8 TO 3/4NON-MAGNETIC, 7 SECTION nan

GAUGE, ROPE MEASURING, STEEL, 3/8 TO 11/16 DIAMETERS

GAUGE, ROPE MEASURING, STEEL, 3/8 TO 11/16 DIAMETERS nan

ELECTRIC MULTI-TESTER

Diode protected super sensitive meter 2 test leads connect to tester Easy-to-read connect to tester Hundreds of uses1 AA battery included nan

DOOR PRESSURE GAUGE

nan Range is from 0-35 Pounds Door Pressure Gauge instrument design specifically to measure force. OPERATING INSTRUCTIONS Set the top (small) o-ring located on the plunger rod on zero, down against the instrument's flange. Stop the door with foot 1/3-1/2 closed and release. Read the amount of force of the closing door on the plunger scale closest to the bottom of the small o-ring.

DIGITAL THICKNESS GAUGE CARBON FIBER SAE & METRIC

Instant thickness measurement for materials and workpieces; accuracy to +/- 0.001/0.03mm Capacity 0.5/12.7mm, resolution 0.0005/0.01mm; instantly converts SAE to metric, vice-versa Non-magnetic, non-rust lightweight carbon-fiber construction; easy-to-read LCD Powered for months by single LR44 1.55V button battery (included); auto-off extends battery life Zero-out scale function, anvil pull-back trigger; 4L x 1.5H x .85D, jaw depth 5/8, weight 2 oz nan